You can appreciate music more if you have good speakers in your house or car. The selection is frequently based on needs, wants, and costs.
You must be familiar with the phrase “coaxial” if you are just getting into audio gear, or let’s say speakers in general, especially car audio.
It is a little perplexing. Yes, I totally don’t blame you. At first, it baffled me as well.
In today’s article, I will address what a coaxial speaker is and how it differs from a traditional speaker.
So let’s get to the point without wasting time further.
Defining Coaxial Speakers
A coaxial speaker is essentially a loudspeaker system with a slightly different construction.
In coaxial speakers, the woofer has a tweeter hanging above it. High-frequency sound is handled by the tweeter, while low- to mid-frequency sound is handled by the woofer.
Although they can be employed elsewhere, as I mentioned at the beginning, these speakers are frequently seen in-car audio systems, so yeah coaxial car speakers.
Coaxial speakers can be just as good as component speakers, even though component speakers sound and operate differently and are the option that most people choose.
Surprisingly enough, you can also find coaxial speakers in a two-way and three-way manner like you find some speakers.
They basically follow the same general rule: a two-way speaker has a woofer and one tweeter, whereas three-way speakers have an additional tweeter.
For obvious reasons, the sound quality and depth increase with each additional tweeter.
Still, this doesn’t change the fact that it can be great even as an individual speaker. It will do the work that it is set out to do just fine.
Since we understand what a coaxial loudspeaker is, it’s time to carry on and compare it to a component speaker; what differentiates them and which one is the better option.
Component and Coaxial Speakers
Not only car speakers, but speakers in general, come in different shapes and sizes. In most cases, an audio aficionado will go for something that is more complex and offers the best sound possible.
On the other hand, the average Joe will opt for something that is easy to install and costs less.
Well, this is the exact case with coaxial and component speakers.
For example, a component offers way better quality sound, while coaxial speakers are way cheaper and offer decent sound quality at a much more reasonable price.
We pretty much have the idea of a coaxial speaker, but we never get to understand what a component speaker is.
A speaker system with separate speakers and a sophisticated crossover that is intended to produce superior sound quality is known as a component speaker.
Compared to a coaxial speaker, it is a little more technologically advanced and provides more sound possibilities.
Component speakers reward with better dome-woofer and tweeter materials because, unlike coaxial speakers whose components are all put together, the component speakers’ mid-range woofer, tweeter, and crossover are all independent components.
So the sound quality can be exceeded in all parts and all ranges.
With that being said, it’s common sense that it will be way harder to install a component speaker. Their parts are all separated, hence the installation process should be done part by part.
Looking at the bright side, at least you can replace two components when one of them is not working properly.
Now that you have a better overall insight with what we are dealing with, I bet there is a question that is going through your mind right now, what would happen if I use a amp on those speakers?
Do component or coaxial speakers require an amplifier?
I like the way you think. Yes, an amplifier will even boost those speakers to higher grounds, and the sound quality will be just wonderful.
But, if you ask me if it’s necessary, I’d say no.To die is a must, I would say.
Your speakers will work just fine without an amplifier, but will it make a difference? Hell, sure it will.
Below you will find some benefits an amplifier can give you.
- It will lower distortion, and it will reward you with cleaner sounds.
- It will block power-robbing or low-end bass.
- It will reward you with great benefits.
- Much higher volume
Your car audio system’s quality can be significantly improved by using an amplifier, even a decent one, let alone a high-end model.
Nevertheless, it is not a must-thing if you have some extra money to spend.
In conclusion, Which is Better: Coaxial or Component?
So we arrived at the end of the article, and before I conclude, the winner let me talk about amplifiers since we left them there.
If you use an amplifier to boost your speakers, it will definitely make a huge difference, but an average person will struggle to tell the difference, but an audiophile person sure will.
Amplifiers don’t come with a painful price tag; you can get a decent one for a few bucks, but the installing and taking care process might be a bit annoying, so take that into consideration too.
Looking at the other hand, no car has been left without a sound, so yeah, it is not a must in any way. You can either place one or not. It’s up to you, but yet again, the difference is crazy huge.
Going back to speakers, I think I can say pretty much the same.
There is no winner between coaxial and component speakers. They both have their advantages and drawbacks.
However, a component speaker will prove better in every way, with the drawback of being a pain to install. On the other hand, the coaxial is quite easy to set up and doesn’t cost the earth.
With that being said, I can conclude that you should get a coaxial speaker if you don’t plan on listening to audiophile-tier sound. You just want some speakers to provide your car with sounds, that’s all.
If you are an audiophile, the component speakers will be worth every single penny. Being an audiophile, I think you already planned the installation process, so that won’t be a problem for you.
This is it. Hopefully, I was crystal clear and you managed to learn something from this article. Enjoy.
If you are done with coaxial speakers, check out the widely known brands, the comparison will make your decision easier. The degree of excellence is measured by JBL Boombox 1 and Boombox 2 speakers, and Audioengine HD3 and A2+.
You need either 2.1 or 3.1 Soundbars to complete the home theater system.
You’ll never find anyone more passionate about audio as me. I love to share my knowledge with others and help people find the right equipment for them.