Since I consider myself an old soul, I have always been into things that are significantly older than me, including movies, songs, and everything else that can be defined as old and evergreen.
I am in love with vinyl records! Sometimes I’m listening to Frank Sinatra or Dean Martin on my headphones, and all of a sudden, I find myself fantasizing about having a vinyl turntable, where I can place my Fran Sinatra vinyl record and listen to it while dancing softly around my room.
Yes, now you know my fantasy, and don’t you dare to judge me.
But sometimes, for some people, the sound of the vinyl turntable is not enough, and they look for speakers to enhance their vinyl turntable’s sound.
You are really lucky if you happen to have a Fluance RT85 vinyl turntable because in this article I’m going to list 4 of the best speakers that you can pair your Fluance RT85 vinyl turntable with! Let’s go!
The Most Good-Looking
|Klipsch RF-7 III|
|Check Price On Amazon|
The Most Compatible
|Check Price On Amazon|
The Most Versatile
|Check Price On Amazon|
|ELAC Debut 2.0 B6.2|
|Check Price On Amazon|
The 4 Best Speakers For Fluance RT85
4. Klipsch RF-7 III – The Most Good-Looking
The twin 10″ woofers of the RF-7 III move a TON of air just by themselves, so your space immediately feels pressured. The RF-7 IIIs feel as like they are enhancing your sub’s capabilities when you add them, which will put a grin on the face of any bass enthusiast.
To put it another way, you could purchase smaller tower speakers with 8″ or 6″ woofers and have all the LFE you require with a powerful Klipsch sub. However, you’ll hear more mid-range to middle-low frequencies with the RF-7 IIIs, which results in more linear bass response because it’s equivalent to adding more subs to your system.
With the exception of real subwoofer frequencies, Klipsch RF-7 III floor standers expertly portray everything and anything. This includes singers, layered instruments, cutting-edge Hollywood sound effects, deep bass, and shattering highs.
If you’re a music or movie enthusiast with the money and the room, run, don’t walk, to your local Klipsch outlet so you can try out a pair and add them to your system right away.
Specifications of Klipsch RF-7 III:
- Frequency Response: 32–25kHz +/– 3dB
- Power Handling: 250W / 1000W peak
- Sensitivity: 100 dB @ 2.83V / 1M
- Nominal Impedance: 8 ohms compatible
- High Frequency Horn: 8.5” square 90? x 90? Tractrix® Horn
- High Frequency Drivers: One 1.75” (4.45cm) titanium diaphragm compression driver
- Crossover Frequency: 1,300 Hz
- Low Frequency Drivers: Two 10” (25.4cm) Cerametallic cone woofers
- Inputs: Dual binding posts / bi-wire / bi-amp
- Enclosure Type: Dual chambered, bass-reflex — via dual rear-firing Tractrix ports
- Dimensions: 49” (124.5cm) H x 13.875” (35.2cm) W x 17.875” (45.4cm) D (including plinth)
- Weight: 97 Ibs (44.1kg)
3. Fluance Signature – The Most Compatible
In terms of home audio, the Fluance Signature Series is unbeatable. These speakers are the culmination of years of rigorous engineering, starting with the powerful midrange and ending with the ultra-high end tweeters.
With an emphasis on sound perfection, every aspect has been evaluated, tested, and refined to faithfully reproduce even the most minor audio nuances.
sound that fills the entire room with surround sound. These surround sound speakers are made to be placed next to or behind the listener, and they use the acoustics of your room to reflect sound in all directions for an immersive home theater experience.
In order to withstand even the greatest volume levels while maintaining sonic precision and purity, the midrange drivers are woven with lightweight yet robust glass fiber for the best linear movement.
Sound waves can go directly from the center of the cone to the distinctive pointed dome, which improves the soundstage. This makes sure that each movie is heard as the sound designers intended.
These speakers are not your standard surrounds; they may also be used as fronts or bookshelves. They operate admirably at all volume levels with exceptional precision and clarity, enabling you to take in the full dramatic impact that your movies and music have to offer.
High frequencies are produced by the super duper Signature Series Neodymium tweeters with mesmerizing clarity and expansive imaging. These tweeters will convey the finest details from the film in a controlled, smooth, and never overbearing manner.
Specifications of Fluance Signature:
- Speaker Configuration: 2 Way – 2 Driver Surround Speaker (Wall Mountable)
- Tweeter: 1 Inch Neodymium Balanced Silk Dome Ferrofluid Cooled
- Woofer: 5 Inch Glass Fiber Treated Butyl Rubber Surrounds
- Power Handling: 30 – 120 Watts
- Frequency Response: 60hz – 20khz
- Sensitivity: 85 Db @ 2.83v / 1m
- Crossover Frequency: 2300hz Phase Coherent
- Impedance: 8 Ohm Compatible
- Enclosure: Dual Tuned Front Port Bass Reflex Design
- Dimensions: 12.8 x 7.87 x 8.22 Inch
- Speaker Weight: 9.7 Pounds/Speaker
2. Edifier R1280Ts – The Most Versatile
The powered bookshelf speakers from Edifier, the R1280T, strike a lovely mix between price and sound quality. In fact, you will taken aback by how rich and substantial the sound quality will be when you will take these out of the box and connect them to a smartphone and aux cord.
They have a footprint that is significantly smaller than that of a typical shoebox, measuring around 9.5 inches in height and little under 6 inches in breadth. I did find them to be a little hefty on the long end at roughly 7 inches deep, so bear that in mind when selecting speakers for a small shelf, but since this time I have listed these speakers as one of the best speakers to be paired with Fluance RT85, you are good to go.
These speakers have a rustic, almost 1970s appearance thanks to the use of light, brown wood on the sides that clearly displays the grain. However, the front’s fabric grille is a distinctive light-stone gray with a thin, metallic accent line running through the center of it. The Edifier logo is imprinted on the bottom in the same color and substance.
Much more than you might anticipate given the size of the driver, there is a decent body on the bottom end. The construction of the speaker enclosures and the materials used are most likely to blame for this.
Each cabinet has a flaring bass port that protrudes out the front and is only somewhat larger than the tweeters, which appear to be working hard on the low end of the spectrum. The amount of detail that is available at the high end of the spectrum, which is typically lost in favor of more bass in smaller enclosures, is also remarkable.
Specifications of Edifier R1280Ts:
- Speaker Configuration: 2-Way
- Drivers: 1 x 4.17″ / 106 mm Woofer (per Speaker) 1 x 0.51″ / 13 mm Silk Tweeter (per Speaker)
- Enclosure Type: Bass-Reflex
- Ports: 1 x Front-Firing (per Speaker)
- Frequency Response: 75 Hz to 18 kHz
- SNR (Signal-to-Noise Ratio): 85 dBA
- Input Sensitivity: 750 mV
- AC Input Power: 100 to 240 VAC, 50 / 60 Hz at 300 mA
- Placement & Mounting Options: Tabletop/Bookshelf
- Dimensions: 5.7 x 9.5 x 7″ / 146 x 241 x 178 mm
1. ELAC Debut 2.0 B6.2 – Best Overall
The B6.2 has a brightly old aesthetic that is similar of vintage British designs. When compared to the original Debut B6, the update is noticeably larger and sleeker with the inclusion of a front bass port, making it appear to be a completely different speaker.
If you look closely, you’ll see that the brushed vinyl of the original Debut has been replaced with an obnoxious black ash wrap. Finally, there are two metal binding posts around the back.
The top end of the Debut 2.0 speakers goes all the way to 35kHz. Its sonic character is much improved by this balance. In actuality, the Debut 2.0 B6.2 speakers are all about balance.
They don’t sound as aggressive or as dynamic as Klipsch boxes, but they also don’t sound as dark and rich as their forerunner. In the end, you will have a pair of loudspeakers that sound lot better, are balanced, and don’t really split opinion. Definitely one of the best speakers for Fluance RT85.
Specifications of ELAC Debut 2.0 B6.2:
- Enclosure Type: 2- Way Bass Reflex
- Frequency Response: 44Hz – 35000Hz
- Nominal Impedance: 6 Ohms
- Sensitivity: 87db @2.83v/1m
- Crossover Frequency: 2200Hz
- Max Power Input: 120 Watts
- Tweeter: 1″ Cloth Dome
- Woofer: 6-1/2″ Aramid Fiber
- Cabinet: CARB2 Rated MDF
- Cabinet Finish: Black Ash Vinyl
- Port: Dual Flared
- Binding Posts: 5 – Way Metal
- Dimensions (WxHxD)7.69″ x 14.76″ x 10.55″
Fluance RT85 is an amazing vinyl turntable, and I have listed for you the best speakers that you can pair with it. You can rest assured that regardless of which one of the above-mentioned speakers you choose, the sound of your vinyl turntable will be definitely enhanced, and that speaker will be a great addition to your home theater.
As you already know, I always have homework for you, and this time is not any different. I remember vividly that I have written an article about how vinyl records work, and I recommend it for you to read it. One another article related to vinyl records, is the Best Subwoofers For Vinyl in 2022 (Top 5 Picks) which is a must to be read!
Happy reading and I’ll see you next time!
- JBL Flip 5 vs. JBL Flip Essential: Which Is Better? - July 16, 2022
- Do You Need an Audio Interface for Studio Monitors? - July 16, 2022
- Are Beyerdynamic Headphones Good For Gaming? - July 13, 2022